Download SetFSB version 2.2.1

setfsb
  • Version 2.2.1.
  • Download 2354
  • File Size 238 KB
  • File Count 1
  • Create Date 18.03.2020
  • Last Updated 07.05.2020

Download SetFSB only if you are an experienced user.

 

Advanced Users Download SetFSB

Users download SetFSB for quick and easy overclocking of central processing unit. This specialized utility is usually used to overclock laptops, but it can also be used for ordinary computers including those running on Xeon processors. The program enables users to change easily the frequency without rebooting the system. After finishing download SetFSB users find a simple and friendly interface and overclocking is carried out using the movement of the slider. However, it is not recommended to use the utility for beginners.

The download  SetFSB allows to change your computer's Front Side Bus (FSB) speed. The utility supports a wide range of chipsets and is easy to use. Just move the slider to set the desired FSB speed and see the resulting CPU speed.

Hardware is only capable of handling so much input. If you put more stress on your hardware than what it can handle, then it could cause permanent damage to it. On the other hand, if you can manage your hardware successfully, then you can significantly boost its performance.

 

The download SetFSB Allows for Better Performance

The application lets you manage the Front Side Bus of your computer. The Front Side Bus is what links the CPU of your computer to its primary memory. Megahertz is the measurement of speed for it, which can range anywhere between 60 and 400. The more speed there is, the better it will perform.

In the old days, the speed of the Front Side Bus was set by the BIOS. Sometimes the motherboard had jumpers positioned on it which changed the speed too. Nowadays, third-party software exists which can change the speed of the Front Side Bus with very little effort. When you increase the speed of the Front Side Bus, this is known as overclocking. This is the main function of the SetFSB application.

You need to have advanced knowledge of computer hardware to use this application successfully. The program depends on your computer skills so that you don't overclock too much and damage the computer. But if you overclock properly, you could make the performance of the computer so much better.

 

How to operate the program

First, it is necessary to download SetFSB for Windows and start the application on the computer. Users are to find out the model of the clock generator for a correct configuration. One can find such information on the processor chip, but what concerns laptops the procedure is quite complicated. It is much easier to visit the website of the manufacturer and find out the installed model. Therefore, the user is aware of the model of the clock generator and the program is started. The next step is to choose PLL value corresponding to user’s model.

Users need to test the generator to determine the current clock frequency. In the application window, one clicks the Get FSB button. After a short test, the current value appears in the Current Frequency line. In the field Select Frequency there will also be displayed the frequency value and both indicators will be still the same. The second field corresponds to the new frequency that users are going to set.

 

Download SetFSB

 

Navigate the CPU Details Fast

Choose the clock generator which corresponds to your computer’s motherboard. Select the “Get FSB” button. After you do that, the program shows you the frequency of your PCI device, AGP device, DDDR device, and FSB device. The dedicated sliders let you adjust these values to what you want them to be.

 

Consistently Monitor the System Parameters

The system parameters must be monitored consistently and carefully, including the processor frequency and temperature. Also, a diagnosis can be conducted that includes a forced alteration of the SMBus register and PLL register.

 

 

 

Changing the frequency of the clock generator

To perform the simplest actions in the program, there is a special slider below the selection field for the frequency value. Moving the slider in the necessary direction users either increase or decrease the current indicator. It is not advised to increase the value of the current frequency to a large range at once. Such an action may affect the processor negatively and cause its damage.  Thus, the shift of the slider for a safe change in frequency should not exceed 15 MHz, they say 20 MHz is maximum. Users can use the activation item Ultra to access advanced settings. Advanced settings should be used only by experts. Having completed the setting procedure, users save the settings of the necessary option value using the button Set FSB.

 

Monitoring CPU temperature indicators

It is strongly recommended to monitor the temperature indicators of the CPU and its cores after the changes in the value. In case of a critical excess of the accessible threshold it is possible to reduce the frequency and temperature. Otherwise, the processor simply burns out. That is why such precautions are necessary. Users can use a CoreTemp utility for this purpose. CoreTemp is a powerful program to monitor processor temperature. It can display a temperature of each individual core of every processor. In addition, users are able to observe temperature fluctuation in real time with different workloads. There are also programs with advanced features such as AIDA64. The main thing is if the applications show peak loads exceeding at least one indicator for one core, the frequency should be reduced. It is also essential to remember that the reduction should be in limited steps, it is not recommended to reduce immediately the whole range to the original values.

 

To conclude

The system requirements to download SetFSB is Windows XP and above. The great thing about the utility is that it does not change the voltage. This ensures the security of computer components. At the same time users should be very precise while working with the program; in case the frequencies are too high, it may cause great damages.

 

The project BTCNIX.com was created especially for the needs of individuals and companies earning through mining. It is no secret that this process is very complex and requires impressive capacities. Here you will find lots of useful software products that can improve the technical parameters of the equipment and positively affect all mining processes.

SetFSB (the tool allows to tune Front Side Bus speed; features the multiple of options and chipsets, is really easy to manage).

The project has gathered the most efficient and productive solutions for mining equipment acceleration and tuning. Here one may find the latest versions of such programs and utilities. Most of them are provided for free, are understandable and easy to use. No matter how perfect your equipment (computers, servers) is, it will need to be improved and strengthened in any case.
This software will allow to organize their work and increase overall performance indicators and parameters.

Recommended

Phoenix BIOS Editor – download for Windows
NVTweak for Driver Cards – download for Windows
Download OverdriveNTool 0.2.8 (Final Version)

2 thoughts on “Download SetFSB version 2.2.1

    Hi i was just given a program called setFSB i think its a overclocker for the cpu but i don’t know ?

    Anyone know what this dose i see in the setting of the program there is a G73JH setting and if it is a over clocker i don’t think i will use it.

    A friend payed for the key to use but is don’t work on his laptop i guess so he emailed me the program and key.

    21 views no help 🙁 ok i know theres alot of overclockers where are you ?

    With SETFSB you simply raise the PLL and test every couple of mhz by using something like Prime 95 to make sure it does not lock up or BSOD. As you have the 720qm like me you will start at 139PLL or 153PLL depending if you have turbo mode on. Work your way up and as above you will gradually reach a point where things start not responding, gadgets and programs start crashing and you eventually BSOD. For me that is around 187PLL although my overclock ability as per my sig link of 2ghz is a lot higher than the norm and I usually hang around 185PLL to remain stable. Remember what your highest clock is and drop it down 4 or 5mhz once you have rebooted from the BSOD and then stress and test the PLL to make sure its stable, if not drop it a few more.

    (SETFSB will reset back to default 139PLL if you crash or restart your computer)

    IMPORTANT: have a read through this and apply this fix if you plan to o/c the CPU as Windows 7 has an adverse effect which needs correcting with a simple timing fix applied through DOS prompt using administrator settings. All compliments go to Unclewebb for this fix and his continued support with CPU overclocking.

    Overclocks are limited by voltage and thanks to Asus it would appear because of hardwiring these cannot be changed so as long as you have good temps at the moment or good paste you wont really need to worry about the small increase in temperature, but use HWINFO to make sure everything is running as it should by using the sensors. Also every chip is different so do not expect to reach what others have or expect to reach more, as Tijo has explained on another recent overclocking post that chips are put through certain tests to make sure they can handle the stock clocks, voltage, watts, etc (called binning) and if they pass the tests they are allowed into the OEM production world, they do not necessarily test for the chip to reach the sort of output we aim for which in my case is excessive and im nearing the point of attaching a car battery to the GPU/CPU.

Leave a Reply

Your email address will not be published. Required fields are marked *